How to Set Up OpenVPN on TP-LINK Routers with VPNUK

Setting up an OpenVPN connection on a TP-Link Router

This guide will walk you through configuring an OpenVPN connection on a TP-Link router using VPNUK’s secure VPN service. Unlike other setups that require separate .crt, .key, and .ovpn files, VPNUK provides a single .ovpn configuration file, making setup faster and easier.

1. Download Your VPNUK OpenVPN Configuration File

  1. Click Here to open our OpenVPN configuration file downloader.
  2. Log in with your VPNUK account credentials.
  3. Download an OpenVPN TCP or UDP configuration file (.ovpn)
  4. Save the configuration file to your computer.

2. Enable OpenVPN on TP-Link Router

  1. Log in to your TP-Link router via the web interface (http://tplinkwifi.net or your router’s IP address).
  2. Navigate to Advanced > VPN.
  3. Select OpenVPN and click Enable.

3. Import the VPNUK OpenVPN Configuration File

  1. Click Import Configuration File.
  2. Select the .ovpn file you downloaded earlier.
  3. Click Upload to apply the settings.

4. Configure OpenVPN Client Settings

  1. Ensure the following settings are correct:
    • VPN Type: OpenVPN Client
    • VPN Server Address: (From your .ovpn file)
    • Username: (Enter your VPNUK username)
    • Password: (Enter your VPNUK password)
    • Encryption: AES-256-CBC
    • Authentication: SHA1
    • Protocol: TCP (or UDP)
    • Port: 443 for TCP or 1194 for UDP
  2. Click Save & Apply.

5. Configure Firewall & Routing for OpenVPN

  1. Navigate to Advanced > Firewall.
  2. Ensure VPN Passthrough is enabled.
  3. Navigate to Advanced > Routing.
  4. Add a new route:
    • Destination Address: 0.0.0.0/0
    • Gateway: OpenVPN Interface
  5. Click Save & Apply.

6. Connect & Verify VPN Status

  1. Go to VPN > OpenVPN.
  2. Click Connect to establish a VPN connection.
  3. Check the VPN Status tab to confirm the connection is active.

To verify your VPNUK connection is working, check your VPNUK IP address at: https://www.ipaddress.com/

Enjoy Secure VPN Access with VPNUK & OpenVPN on your TP-LINK router!

Did this guide help? Please provide us with feedback here or share it with others looking for a secure VPN setup on TP-Link routers!

Troubleshooting Common Issues

Cannot connect to VPNUK servers?
Ensure your OpenVPN server address is correct.
Ensure you are using the correct .ovpn configuration file.
Restart your TP-Link router and try again.
Check if your ISP is blocking OpenVPN traffic.

VPN is connected, but no internet?
Navigate to Firewall settings and ensure VPN Passthrough is enabled.
Check Routing settings to confirm OpenVPN is set as the default gateway.

Final Thoughts & Security Notes

  • OpenVPN on TP-LINK provides strong encryption, ensuring secure and private internet access.
  • If you experience performance issues, consider using WireGuard or L2TP/IPSec, which offer better speed and compatibility.
  • Keep your TP-LINK firmware updated for the best performance and security.
  • If you have any problems with the connection please contact our 24/7 support team.