Setting up WireGuard® VPNUK on TP-Link Routers

WireGuard is a modern VPN protocol known for its simplicity, speed, and robust security. Many TP-Link routers now support WireGuard, allowing users to establish secure and efficient VPN connections. This guide will walk you through configuring a WireGuard VPN connection on a TP-Link router using VPNUK’s secure VPN service.

WireGuard® configuration download

Please login using the VPN login username and password from the vpn account you would like to configure.
Click Here to download your WireGuard® configuration file, which is compatible with all devices.

IMPORTANT NOTES: A WireGuard® connection is currently only compatible with our Dedicated IP accounts. Each configuration file is generated automatically, twice per hour, the process can take up to 20 minutes to complete, it can therefore sometimes take up to 1 hour for a new configuration file to be created on new accounts. If you are a new user please allow the system time to generate your configuration file.

Before proceeding, ensure your TP-Link router supports WireGuard. Models such as the Archer AX55, Archer AX53, and Archer GE800 are known to support WireGuard. For a comprehensive list, refer to TP-Link’s official documentation or your router’s user manual.

1: Open your configuration file.

1. Click Here to download the WireGuard configuration file (.conf).
2. Open the .conf file in Notepad or a text editor and take note of the following details:
   • Private Key
   • Public Key
   • Allowed IPs
   • Endpoint (VPNUK Server Address)
   • Port

2. Configure WireGuard VPN Client on TP-Link Router

1. Open a web browser and navigate to http://tplinkwifi.net or your router’s IP address.
2. Enter your TP-Link ID or the password you set for the router.

3. Enable VPN Client:

1. Navigate to Advanced > VPN Client.
2. Toggle the VPN Client switch to Enable.
3. Click Save.

4. Add WireGuard VPN Configuration:

1. Click the Add button in the upper-right corner of the Server List.
2. Set the Description (e.g., VPNUK-WireGuard).
3. Choose WireGuard as the VPN Type.
4. Click Browse to import the WireGuard configuration file you downloaded earlier.
5. Click Save.

5. Activate the WireGuard Connection:

1. In the Server List, locate the newly added WireGuard configuration.
2. Toggle the switch to Enable the connection.

6. Assign Devices to Use the VPN:

1. Navigate to VPN Client > VPN Access.
2. Click Add to specify which devices should use the VPN connection.
3. Select the devices from the list and click Save.

7. Verify VPN Status

1. To confirm the connection, check your new IP address by visiting: https://www.ipaddress.com/
   Your IP should now match your unique VPNUK IP.

Enjoy Secure VPN Access with VPNUK & WireGuard on TP-Link Routers

Did this guide help? Please provide us with feedback here or share it with others looking for a secure VPN setup on TP-Link Routers!

Optional WireGuard Settings for TP-LINK Routers

1. Enable Auto-Start for WireGuard VPN

To ensure your TP-Link router automatically connects to VPNUK’s WireGuard VPN after reboot or network failure:

1. Auto-Connect on Startup

   To ensure the VPN reconnects automatically after a reboot or disconnection:

   1. Navigate to Advanced > VPN Client.
   2. Ensure the VPN Client is enabled.
   3. The router will maintain the VPN connection persistently.

2. Selective Routing (Policy-Based Routing for Specific Devices)

By default, all connected devices use the VPN tunnel. To route only specific devices through the WireGuard VPN:

1. Navigate to Advanced > VPN Client > VPN Access.
2. Click Add to specify devices that should use the VPN.
3. Select the desired devices and click Save.

3. Kill Switch (Block Internet if VPN Disconnects)

1. A kill switch ensures that if the VPN disconnects, internet access is blocked to prevent data leaks:

   1. Navigate to Advanced > Firewall > Access Control.
   2. Create a new rule:
      • Target: Select the devices you want to apply the rule to.
      • Internet Access: Choose Block.
      • Schedule: Set to Always.
   3. Click Save.

   This rule will block internet access for the specified devices if the VPN connection is not active.

Troubleshooting Common Issues

Cannot Connect to VPNUK Servers?

• Ensure your WireGuard configuration file is correctly imported.
• Verify your internet connection is stable.
• Restart your TP-Link router and try again.
• Check if your ISP is blocking VPN traffic.

VPN is Connected, but No Internet?

• Ensure the devices are correctly assigned to use the VPN under VPN Access.
• Check firewall settings to ensure they are not blocking VPN traffic.
• Verify that the VPN client is properly configured and active.

Final Thoughts

WireGuard on TP-Link routers provides a fast, secure, and efficient VPN solution. By following this guide, you can ensure a private and encrypted internet experience with VPNUK. Always keep your router’s firmware updated to benefit from the latest features and security patches. For further assistance, contact VPNUK’s 24/7 support team.